Publikasjoner
NIBIOs ansatte publiserer flere hundre vitenskapelige artikler og forskningsrapporter hvert år. Her finner du referanser og lenker til publikasjoner og andre forsknings- og formidlingsaktiviteter. Samlingen oppdateres løpende med både nytt og historisk materiale. For mer informasjon om NIBIOs publikasjoner, besøk NIBIOs bibliotek.
2006
Sammendrag
When using chitosan as an antifungal agent in wood it is important to understand which factors contribute to a higher fixation ratio to optimize the utilization of chitosan, the active component. Small pine samples were impregnated with chitosan solutions varying in molecular weight, concentration, pH, polymerization agent, acid and degree of deacetylation. Different post-treatments such as time, temperature, moisture content and the effect of present air were applied to the samples to evaluate the effect on the relative retention. After impregnation, the samples, with a volume of 1.5 cm3, were leached in separate test-tubes according to EN-84. The samples were prepared in a paired design where both samples were impregnated, but only one was leached. Both leached and unleached samples were analysed for their chitosan content, and the relative ratio was used as a measure for the relative retention of chitosan during leaching. The results from these trials show that pH in the range of 5.1-5.9 is favourable. The molecular weight should be as high as possible yet able to penetrate the wood structure, and the use of acetic acid gives far better fixation than the use of hydrochloric acid.
Forfattere
Erik LarnøySammendrag
Det er ikke registrert sammendrag
Forfattere
Andreas TreuSammendrag
Det er ikke registrert sammendrag
Sammendrag
Resins and oils can easily evaporate during drying processes at high temperatures. The aim of this research was to investigate different drying methods such as oven-drying, vacuumdrying and freeze-drying of resin modified pine-sapwood samples to determine wood moisture content (MC) and weight percent gain (WPG). The results showed that freeze-drying is the slowest process. Vacuum drying of water impregnated samples takes approx. 7 times longer compared to oven-drying. The initial moisture content of wood before impregnation used in this research has only little influence on the WPG.
Forfattere
Andreas TreuSammendrag
Det er ikke registrert sammendrag
Sammendrag
This study evaluates the decay and termite resistance of Scots pine (Pinus sylvestris L.) treated with 4-methoxytrityl tetrafluoroborate (MTFB).Decay resistance tests of unleached samples showed that 2%, 1.5% and 1% concentrations of MTFB (15.4kg/m3, 11.1kg/m3, and 7.4kg/m3, retention levels, respectively) gave less than 2% decay of Postia placenta and concentrations of 2% and 1.5% less than 2% decay of Coniophora puteana.Wood specimens treated with 4-methoxytrityl tetrafluoroborate solutions were not protected against the brown rot fungi after a 14-day severe leaching process, suggesting excessive leaching of the chemical from wood. Treatment with 2% concentration protected against subterranean termites, Coptotermes formosanus Shiraki based on mass losses in both leached and unleached wood specimens in comparison with lower concentration levels.These results suggest that 4-methoxytrityl tetrafluoroborate might be promising to protect wood being used outdoors against termite attack. However, 4-methoxytrityl tetrafluoroborate did not protect wood against fungal decay. Field tests are needed to observe the performance of 4-methoxytrityl tetrafluoroborate treated wood in ground contact.
Sammendrag
In Norway exterior wood structures have traditionally nearly exclusively been made of treated and untreated Norway spruce (Picea abies (L.) Karst) and Scots pine (Pinus sylvestris L.). In recent years there has been a tendency that other tree species, like various domestic hardwoods and imported species have been used in exterior above ground applications, often unfinished. For several wood species, especially hardwoods, information regarding the durability in use class 3 is lacking. The test procedures prescribed in the European standards, both laboratory and field tests, have some weaknesses regarding to natural durability testing. Hence, some new methods for accelerated above ground testing have been put forward. The main objectives of this project are to evaluate natural durability of Norwegian wood species for above ground applications, and to study various methods for assessing decay in wood. This paper presents the material and methods used in the project, and report the results from double layer tests after one year of exposure. No decay was detected, but almost all wood species were considerably discoloured. Thuja (Norw.), Thuja (Am.), Intsia and Tectona had the least amount of discolouration. The Norwegian softwood species had generally less discolouration than the Norwegian hardwood species. CCA and Cu preservative impregnated and FA modified Pinus sylvestris sapwood had more cracks than most of the untreated wood species. Moreover, some of the Picea abies qualities and Pinus sylvestris sapwood samples had substantial amounts of cracks.
Sammendrag
Det er ikke registrert sammendrag
Sammendrag
Det er ikke registrert sammendrag
Populærvitenskapelig – Sopp i norske bygninger!
Gry Alfredsen, Kolbjørn Mohn Jenssen, Halvor Solheim
Sammendrag
Det er ikke registrert sammendrag