Publications
NIBIOs employees contribute to several hundred scientific articles and research reports every year. You can browse or search in our collection which contains references and links to these publications as well as other research and dissemination activities. The collection is continously updated with new and historical material.
2023
Authors
Arne Stensvand Katherine Ann Gredvig Nielsen Nina Trandem Vinh Hong Le Lill-Iren Hansen Anita SønstebyAbstract
Steam treatment against diseases and pests in raspberry transplants
Abstract
Appropriate weed control measures during the renewal phase of temporary grasslands are critical to ensure high yields during the whole grassland lifecycle. The aim of this study was to determine which integrated grassland renewal strategy can most effectively control annual weeds in the sowing year and delay perennial weed re-establishment. Four split-plot trials were established at three sites dominated by Rumex spp. along a south-north gradient in Norway. The annual and perennial weed abundance was recorded during the sowing year and two or three production years. Main plots tested seven renewal strategies: 1. Spring plowing, 2. Spring plowing+companion crop (CC), 3. Summer cut+plowing, 4. Summer glyphosate+plowing, 5. Summer glyphosate+harrowing, 6. Late spring glyphosate+plowing, 7. Fall glyphosate+spring plowing+CC. Strategies 1–4 were tested in all four trials, strategy 5 in three trials, strategy 6 in two trials and strategy 7 in one trial. Plowing was performed at 20–25 cm depth, rotary harrowing at 15 cm depth, and glyphosate was applied at 2160 g a.i. ha-1. CC was spring barley (Hordeum vulgare). Subplots tested selective herbicide spraying (yes/no) in the sowing year. Results showed that effects of renewal strategies were often site-specific and differed between the sowing year and production years. Spring renewal resulted in higher perennial weed abundance than summer renewal in two out of four trials (by 3 and 12 percentage points, over all production years), and glyphosate followed by harrowing drastically increased Rumex spp. in one out of three trials (by 18 percentage points over all production years). CCs only significantly reduced perennial weed abundance in one trial (by 8 percentage points over all production years). In comparison, the selective herbicides had a strong effect on annual and perennial weeds in the sowing year in all trials. Selective herbicides reduced the weed cover from 32% to 7% cover, and averaged over the production years and sites, the perennial weed biomass fraction was 6 percentage points lower where herbicides had been applied. We conclude that while the tested renewal strategies provided variable and site-specific perennial weed control, selective herbicides were effective at controlling Rumex spp. and other perennial dicot weeds in the first two production years.
2022
Abstract
Established invasive alien plant species make it difficult and costly to move and make use of infested soil in public and private construction work. Stationary soil steaming as a non-chemical control method has the potential to disinfect soil masses contaminated with seeds and other propagative plant materials. The outcome can vary depending on steaming temperature and duration. Higher temperatures and longer durations are relatively more efficient but may also have side-effects including change in soil physical and chemical characteristics. Barnyard grass (Echinochloa crus-galli) is among troublesome invasive species in Norway. We have tested different steam duration at 99°C to find the possible lowest effective exposure duration for killing seeds of this annual grass species. Four replications of 40 barnyard grass dry seeds of one population were placed in polypropylene-fleece bags (9*7 cm), moistened for 12 hours, and covered by the soil at a depth of 7 cm in 60*40*20 cm boxes. The boxes with soil and bags were steamed at 99°C for 1.5, 3 and 9 min. The bags including steamed seeds were taken out, opened, placed on soil surface in pots and covered by a thin layer of soil. The pots were placed in greenhouse and watered from below and seed germination was followed for a month. Moistened non-steamed seeds were used as control. It was shown that steaming at 99°C gave 0% germination indicating that 100% of the seeds were killed regardless of exposure duration while in the control seed germination was 100%. Consequently, to achieve an efficacy of 100%, exposure duration of 1.5 min would be enough. Finding the lowest possible steam temperature and exposure duration to get the highest possible seed killing in a seed mixture of different plant species as well as other factors to increase the heat transferability are under investigation. Keywords: Echinochloa crus-galli; Resource recovery; Steaming temperature and duration; Thermal soil disinfection
Abstract
Reusing soil can reduce environmental impacts associated with obtaining natural fresh soil during road construction and analogous activities. However, the movement and reuse of soils can spread numerous plant diseases and pests, including propagules of weeds and invasive alien plant species. To avoid the spread of barnyardgrass in reused soil, its seeds must be killed before that soil is spread to new areas. We investigated the possibility of thermal control of barnyardgrass seeds using a prototype of a stationary soil steaming device. One Polish and four Norwegian seed populations were examined for thermal sensitivity. To mimic a natural range in seed moisture content, dried seeds were moistened for 0, 12, 24, or 48 h before steaming. To find effective soil temperatures and whether exposure duration is important, we tested target soil temperatures in the range 60 to 99 C at an exposure duration of 90 s (Experiment 1) and exposure durations of 30, 90, or 180 s with a target temperature of 99 C (Experiment 2). In a third experiment, we tested exposure durations of 90, 180, and 540 s at 99 C (Experiment 3). Obtaining target temperatures was challenging. For target temperatures of 60, 70, 80, and 99 C, the actual temperatures obtained were 59 to 69, 74 to 76, 77 to 83, and 94 to 99 C, respectively. After steaming treatments, seed germination was followed for 28 d in a greenhouse. Maximum soil temperature affected seed germination, but exposure duration did not. Seed premoistening was of influence but varied among temperatures and populations. The relationships between maximum soil temperature and seed germination were described by a common dose–response function. Seed germination was reduced by 50% when the maximum soil temperature reached 62 to 68 C and 90% at 76 to 86 C. For total weed control, 94 C was required in four populations, whereas 79 C was sufficient in one Norwegian population.
Authors
Samuel F. Kamga Frank T. Ndjomatchoua Ritter Atoundem Guimapi Ingeborg Klingen Clément Tchawoua Anne-Grete Roer Hjelkrem Karl Thunes Francois M. KakmeniAbstract
Despite substantial efforts to control locusts they remain periodically a major burden in Africa, causing severe yield loss and hence loss of food and income. Distribution maps indicating the value of the basic reproduction number R0 was used to identify areas where an insect pest can be controlled by a natural enemy. A dynamic process-based mathematical model integrating essential features of a natural enemy and its interaction with the pest is used to generate R0 risk maps for insect pest outbreaks, using desert locust and the entomopathogenic fungus Metarhizium acridum (Synn. Metarhizium anisoliae var. acridum) as a case study. This approach provides a tool for evaluating the impact of climatic variables such as temperature and relative humidity and mapping spatial variability on the efficacy of M. acridum as a biocontrol agent against desert locust invasion in Africa. Applications of M. acridum against desert locust in a few selected African countries including Morocco, Kenya, Mali, and Mauritania through monthly spatial projection of R0 maps for the prevailing climatic condition are illustrated. By combining mathematical modeling with a geographic information system in a spatiotemporal projection as we do in this study, the field implementation of microbial control against locust in an integrated pest management system may be improved. Finally, the practical utility of this model provides insights that may improve the timing of pesticide application in a selected area where efficacy is highly expected.
Abstract
No abstract has been registered
Authors
Ritter Atoundem Guimapi Saliou Niassy Bester Tawona Mudereri Elfatih M. Abdel-Rahman Ghislain T. Tepa-Yotto Sevgan Subramanian Samira A. Mohamed Karl Thunes Emily Kimathi Komi Mensah Agboka Manuele Tamò Jean Claude Rwaburindi Buyung Hadi Maged Elkahky May-Guri Sæthre Yeneneh Belayneh Sunday Ekesi Segenet Kelemu Henri E. Z. TonnangAbstract
After five years of its first report on the African continent, Fall armyworm (FAW), Spodoptera frugiperda (J.E. Smith) is considered a major threat to maize, sorghum, and millet production in sub-Saharan Africa. Despite the rigorous work already conducted to reduce FAW prevalence, the dynamics and invasion mechanisms of FAW in Africa are still poorly understood. This study applied interdisciplinary tools, analytics, and algorithms on a FAW dataset with a spatial lens to provide insights and project the intensity of FAW infestation across Africa. The data collected between January 2018 and December 2020 in selected locations were matched with the monthly average data of the climatic and environmental variables. The multilevel analytics aimed to identify the key factors that influence the dynamics of spatial and temporal pest density and occurrence at a 2 km x 2 km grid resolution. The seasonal variations of the identified factors and dynamics were used to calibrate rule-based analytics employed to simulate the monthly densities and occurrence of the FAW for the years 2018, 2019, and 2020. Three FAW density level classes were inferred, i.e., low (0–10 FAW moth per trap), moderate (11–30 FAW moth per trap), and high (>30 FAW moth per trap). Results show that monthly density projections were sensitive to the type of FAW host vegetation and the seasonal variability of climatic factors. Moreover, the diversity in the climate patterns and cropping systems across the African sub-regions are considered the main drivers of FAW abundance and variation. An optimum overall accuracy of 53% was obtained across the three years and at a continental scale, however, a gradual increase in prediction accuracy was observed among the years, with 2020 predictions providing accuracies greater than 70%. Apart from the low amount of data in 2018 and 2019, the average level of accuracy obtained could also be explained by the non-inclusion of data related to certain key factors such as the influence of natural enemies (predators, parasitoids, and pathogens) into the analysis. Further detailed data on the occurrence and efficiency of FAW natural enemies in the region may help to complete the tri-trophic interactions between the host plants, pests, and beneficial organisms. Nevertheless, the tool developed in this study provides a framework for field monitoring of FAW in Africa that may be a basis for a future decision support system (DSS).
Abstract
Cattle production is constantly threatened by diseases like East Coast fever, also known as theileriosis, caused by the protozoan parasite Theileria parva which is transmitted by ticks such as the brown ear tick, Rhipicephalus appendiculatus. To reduce the extensive use of chemical acaricides, fungal-based microbial control agents such as Metarhizium anisopliae have been tested and show promising results against R. appendiculatus both in field and in semi-field experiments in Africa. However, no known endeavors to link the spatial distribution of R. appendiculatus to climatic variables important for the successful application of M. anisopliae in selected East African countries exists. This work therefore aims to improve the successful application of M. anisopliae against R. appendiculatus by designing a temperature-dependent model for the efficacy of M. anisopliae against three developmental stages (larvae, nymphs, adults) of R. appendiculatus. Afterward a spatial prediction of potential areas where this entomopathogenic fungus might cause a significant epizootic in R. appendiculatus population in three selected countries (Kenya, Tanzania, Uganda) in Eastern Africa were generated. This can help to determine whether the temperature and rainfall at a local or regional scale might give good conditions for application of M. anisopliae and successful microbial control of R. appendiculatus.
Abstract
Soil disinfestation by steaming is being reconsidered for its efficiency in controlling or even eradicating pathogens, nematodes and weed seeds, particularly to avoid excess use of pesticides. Most weeds within a field result from seeds in the soil seedbank and therefore management of weed seeds in the soil seedbank offers practical long-term management of weeds, especially those difficult to control. We investigated the possibility of thermal control of seeds of grass weeds Bromus sterilis (barren brome) and Echinochloa crus-galli (barnyardgrass) using a prototype of a soil steaming device. Five different soil temperatures of 60, 70, 80, 90 and 99°C with an exposure duration of 3 min were tested. Four replications of 50 seeds of each species were placed in polypropylene-fleece bags. Bags in the same replicate of each target temperature were placed at the bottom of one plastic perforated basket container and covered by a 7-cm soil layer. Each basket was placed in the steaming container and steam was released from the top and vacuumed from the bottom of the container. Soil temperature was monitored by 10 thermocouples and steaming was stopped when 5 of the thermocouples had reached the target temperature. The basket was then removed from the steaming container after 3 min exposure time. Bags were taken out, opened, placed on soil surface in pots and covered by a thin layer of soil. Seed germination was followed for 8 weeks in the greenhouse. Non-steamed seeds were used as controls. It was shown that soil temperatures of 60, 70, 80, 90 and 99°C lasting for 3 min reduced the seed germination of barren brome by 83, 100, 100, 95 and 100% and seed germination of barnyardgrass by 74, 69, 83, 89 and 100% respectively, compared to the controls. Germination rate of control seeds were 94 and 71% for barren brome and barnyardgrass, respectively. These results show a promising seed mortality level of these two weed species by steaming and that steam is a potential method to control weed seeds, however further studies are needed to investigate the effect of other factors such as soil type and moisture content. Keywords: Non-chemical weed control, thermal soil disinfection, weed seedbank
Abstract
Invasive plant propagative material can be introduced to new regions as contaminants in soil. Therefore, moving soil should be done only when the soil has been verified to be free of invasive species. Stationary soil steaming as a non-chemical control method has the potential to disinfect soil masses contaminated with invasive species. We investigated the possibility of thermal control of propagative material of Bohemian knotweed (Reynoutria × bohemica) in two experiments using a prototype of a soil steaming device. Five soil temperatures of 60, 70, 80, 90 and 99 °C with an exposure duration of 3 min were tested. In each replicate and target temperature, rhizome cuttings containing at least two buds and shoot clumps were placed at the bottom of a plastic perforated basket and covered by a 7-cm soil layer. Each basket was placed in the steaming container and steam was released from the top and vacuumed from the bottom. Soil temperature was monitored by 10 thermocouples and steaming was stopped when 5 of the thermocouples had reached the target temperature. The basket was then removed from the steaming container after 3 min. Plant materials were taken out and planted in pots. Buds sprouting was followed for 8 weeks. Non-steamed plant materials were used as controls. Results showed 100% rhizome death at soil temperatures of ≥70 and 99 °C in the first and second experiments, respectively. Shoot clumps death was obtained at ≥90 °C in both experiments. These results showed that steaming at 99 °C for 3 min can guarantee control of Bohemian knotweed in infested soils supporting the steam treatment as a potential method of disinfecting soil against invasive species. However, depending on the intended re-use of the soil, further studies are needed on the effect of potential negative impacts of high temperatures on the soil quality.